User Manual Q&AAnswer
Feb 05, 2025 - 10:39 PM
To pair a new remote controller with the Rayrun T111 Single Color LED Advanced RF Remote Dimmer, follow these steps:
1. Unplug the power of the receiver and wait for at least 5 seconds.
2. Plug in the power of the receiver again.
3. Within 10 seconds after the receiver is powered on, press and hold the "100%" and "60%" keys on the remote controller simultaneously for about 3 seconds.
4. After performing the above steps, the LED fixture will flash quickly to indicate that the remote pairing is successful.
Please note that the Rayrun T111 Single Color LED Advanced RF Remote Dimmer can be paired with up to 5 remote controllers, and each remote controller can be paired with multiple receivers.
Add New Comment