User Manual Q&AAnswer
May 03, 2025 - 11:48 AM
To set up the Wuloo WL-666 Wireless Intercom System, follow these steps:
1. Connect AC Power: Connect each intercom station to your local AC power using the provided adapter and cable.
2. Set Code & Channel: Set the code and channel for each intercom station. Select the same code for all stations to ensure efficient communication. Press and hold any channel number key for 3 seconds to set the channel number of that intercom.
3. Make an "Address List": If you have a large intercom system with many units, create an "address list" to remember which intercoms belong to which users. Record the channel number for each user and distribute the list to all users.
4. Test Connection: Separate the intercoms at least 5 meters apart to prevent interference. Set up each intercom with the same code but different channels. If you can hear audio on both ends of the intercom system, you have successfully set up all the units.
5. Distribute Different Stations to Different Users: After testing, assign different intercom stations and the "address list" to different users.
For more detailed instructions and troubleshooting tips, refer to the Wuloo WL-666 Wireless Intercom System User Manual.
Add New Comment