How do I program the Velleman Universal Timer Module with USB Interface? (Velleman Universal Timer Module USB Interface User Manual)

Answer

manuals.plus

May 03, 2025 - 05:41 AM

To program the Velleman WMT206 Universal Timer Module with USB Interface, you will need to follow these steps:

1. Plug the VM206 into an available USB port on your computer. This will allow Windows to detect the device.

2. Download the latest software version for the VM206 from the Velleman website. Go to http://www.vellemanprojects.eu/suppor... and download the VM206_setup.zip file.

3. Unzip the files in a folder on your drive.

4. Double click the "setup.exe" file to start the installation wizard. Follow the prompts to complete the installation. Shortcuts to the VM206 software will be installed.

5. Locate the VM206 software shortcuts on your computer (programs > VM206 > ...).

6. Click on the icon to start the main program.

7. Click on the 'Connect' button in the software. The "Connected" label should now be displayed.

8. You are now ready to program the VM206 timer. Select any of the options from 1 to 9 for the desired timing program.

9. Enter the desired time or use the default values provided.

10. Click the 'Send' button to program the VM206.

The timer is now programmed and you can check its operation by pressing the TST1 (Start) button. The "RELAY ON" LED will indicate the operation. You can stop the timer operation by pressing the TST2 (Reset) button.

Please refer to the Velleman WMT206 Universal Timer Module with USB Interface User Manual for more detailed instructions and information on the different operating modes and features of the timer.