User Manual Q&AAnswer
May 03, 2025 - 04:50 AM
To install the , please follow the step-by-step instructions provided in the instruction manual. Here is a complete guide on how to install the pendant light:
1. Preinstallation:
- Choose the desired hanging height and use the tubes (J) accordingly.
- Pass the fixture wires through the chosen tubes (J) and xxxx them onto the fixture body (K).
- Attach quick links (G) to loops (F) on the canopy (E) and fixture body (K), then close the quick links.
2. Turn off power:
- Before starting the installation, ensure that the electricity is turned off.
- Go to the main fuse or circuit breaker box in your home and switch off the main power switch.
- Also, turn off the wall switch.
3. Installation:
- Unscrew the hex nut (H) and cap nut (I) from the single bar (C).
- Attach the single bar (C) to the outlet box using the mounting screws (B). Make sure the side marked "GND" faces out.
- If needed, shorten the length of the fixture wires, leaving at least 6" above the single bar (C).
- Make wire connections according to the provided wire connection chart. Ensure that the ground wire is connected properly.
- Twist the wires together with plastic wire connectors and wrap each connector with electrical tape. Tuck all wires into the outlet box.
- Raise the canopy (E) to the ceiling and secure it in place by tightening the hex nut (H) and cap nut (I) onto the threaded xxxx .
- Install bulbs (not included) according to the recommended maximum wattage on the socket.
- xxxx the glass shades (M) onto the sockets (L).
- Double-check that everything is installed properly before turning on the light.
Please note that these instructions are a summary of the installation process. For more detailed instructions and illustrations, refer to the Uolfin 5069584 Gold Modern Contemporary Seeded Glass Linear Pendant Light Instruction Manual provided with the product.
Add New Comment