User Manual Q&AAnswer
May 03, 2025 - 04:32 AM
To install the Sea Gull Lighting 7529693S-848 Small LED Ceiling Flush Mount, please follow the instructions below:
1. Turn off the power: Before starting the installation, make sure to turn off the power to the circuit you will be working on at the circuit breaker.
2. Mounting: Attach the mounting plate to the electrical box using the provided cap nuts. Ensure that the mounting plate is securely fastened.
3. Wiring: Connect the black wire from the fixture to the black (hot) wire from the electrical box using a wire connector. Connect the white wire from the fixture to the white (neutral) wire from the electrical box using a wire connector. If there is a ground wire, connect it to the ground wire from the electrical box.
4. Attach the fixture: Align the fixture with the mounting plate and secure it in place using the provided cap nuts. Make sure the fixture is level.
5. Power on: Turn the power back on at the circuit breaker and test the fixture to ensure it is working properly.
Please note that these are general installation instructions. For specific details and diagrams, please refer to the instruction manual provided with the Sea Gull Lighting 7529693S-848 Small LED Ceiling Flush Mount.
Add New Comment