User Manual Q&AAnswer
May 03, 2025 - 04:16 AM
To assemble the homestyles 5675-601 Love Seat, please follow these steps:
1. Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or damage.
2. Attach the Side (C) to the Back (A) using the Head Cap Bolts (large), tightening the bolts only halfway.
3. Attach the Seat (E) to the unit using the Dowel, Head Cap Bolts, Spring Washers, and Flat Washers, tightening the bolts only halfway.
4. Repeat steps 2 and 3 for the Right Unit, attaching the Side (D) to the Back (B) and the Seat (F) to the unit.
5. Insert Dowels into the pre-drilled holes in the Left Unit and attach it to the Right Unit.
6. Insert the Head Cap Bolts (short), Spring Washers, and Flat Washers into the pre-drilled holes in the unit, then tighten. Attach the Support (G) to the unit with the Head Cap Bolt (long), Spring Washer, and Flat Washer, then tighten.
7. Use velcro to attach the Seat Cushions (H) to the unit.
8. Turn the unit to its upright position and slide the Back Cushions (I) into position. Cover the holes with Wood Plugs.
Please refer to the provided assembly instructions for detailed diagrams and further guidance. Remember not to tighten all the bolts until each part is properly assembled, and do not use power tools above 8 volts for assembly.
Add New Comment