Answer

May 03, 2025 - 04:10 AM
To assemble the Holiday LIVING L20T6-70LD3K3 7 Ft LED Pre-Lit Flocked Pencil Tree, follow these steps:
1. Pull to spread the legs of the tree stand (D) so it forms an X-shape.
2. Remove the protective cap from the tree bottom (C). Insert the tree bottom (C) into the tree stand (D) and xxxx the eye bolts (E) through the holes in the tree stand (D) until they touch the trunk of the tree bottom (C). Adjust the tree bottom (C) by screwing the eye bolts (E) in or out.
3. Shape the branches of the tree bottom (C) to allow them to unfold into place.
4. Remove the protective cap from the tree middle (B). Insert the tree middle (B) into the tree bottom (C). Connect the plug on the light set of the tree middle (B) into the end plug from the tree bottom (C). Shape the branches of the tree middle (B) to allow them to unfold into place.
5. Insert the tree top (A) into the tree middle (B). Connect the plug on the light set of the tree top (A) into the end plug from the tree middle (B). Pull down the branches from the tree top (A) and shape them.
6. Plug the cord (F) into the power supply. All sections of the tree should now be lit.
7. Use the foot switch to change the illumination setting. Press the button on the foot switch to cycle through the different lighting options.
If you need further assistance or encounter any issues during assembly, please refer to the instruction manual or contact the Holiday Living customer service department at 888-251-1006.
Add New Comment