User Manual Q&AAnswer
May 03, 2025 - 03:58 AM
To connect the Velleman VMA453 4 Channel Module to an Arduino board, you can follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Connect the GND pin of the VMA453 module to the GND pin of the Arduino board.
2. Connect the VCC pin of the VMA453 module to the 5V pin of the Arduino board.
3. Connect the SDA pin of the VMA453 module to the SDA pin of the Arduino board.
4. Connect the SCL pin of the VMA453 module to the SCL pin of the Arduino board.
5. If you want to change the I2C address of the module, you can connect the ADDR pin of the VMA453 module to one of the following pins on the Arduino board:
- GND: I2C address 0x48 (1001000)
- VCC: I2C address 0x49 (1001001)
- SDA: I2C address 0x4A (1001010)
- SCL: I2C address 0x4B (1001011)
Please note that the specific Arduino board mentioned in the manual is the VMA100 (UNO), but you can also connect the VMA453 module to other Arduino boards using the same pin connections.
For more detailed information and example code on how to use the VMA453 module with an Arduino board, you can refer to the user manual provided.
Add New Comment