User Manual Q&AAnswer
May 03, 2025 - 03:51 AM
To adjust the hanging height of the Hunter 19789, 19790 Gatz light fixture, you can use the included rods. The fixture comes with 4 12-inch rods and 1 6-inch rod. Determine the desired hanging height and use the appropriate number of rods. To lengthen the fixture, add additional rods. To shorten the fixture, trim the wires to the desired length. Leave at least 8 to 10 inches of wire in addition to the desired length and slide any excess rods off the fixture's wiring to discard. Thread the wires through the rods and pull them until taut before connecting the rods together. All threads should be engaged, but do not overtighten. xxxx the rod onto the threaded post of the fixture. Pull the fixture wires through the top of the canopy and xxxx the top rod to hang straight from the canopy.
Add New Comment