How do I install the HINKLEY 3 Speed Fan and Light Remote Control with Receiver in my ceiling fan? (HINKLEY 3 Speed Fan Light remote control Receiver Instruction Manual)

Answer

manuals.plus

May 03, 2025 - 03:33 AM

To install the HINKLEY 980045 3 Speed Fan and Light Remote Control with Receiver in your ceiling fan, follow these steps:

1. Disconnect the source of electrical power to the ceiling fan by removing the fuse or switching off the circuit breaker.

2. Remove the ceiling fan canopy from the mounting bracket.

3. Disconnect the existing wiring between the ceiling fan and supply at the electrical junction box.

4. Make the following connections using the wire nuts supplied:

- Connect the green fan wire to the bare supply wire.

- Connect the black receiver wire (AC IN L) to the black supply wire.

- Connect the white receiver wire (AC IN N) to the white supply wire.

- Connect the white receiver wire (TO MOTOR N) to the white fan wire.

- Connect the black receiver wire (TO MOTOR L) to the black fan wire.

- Connect the blue receiver wire (FOR LIGHT) to the blue light wire.

Note: If other fan or supply wires are a different color, it is recommended to have a qualified electrician install the unit.

5. Push all connected wires up into the junction box.

6. Reinstall the canopy on the mounting bracket.

7. Restore the electrical power.

Please refer to the instruction manual for more detailed information and diagrams (Fig. C).

Note: It is important to ensure that the power is disconnected and to follow proper safety precautions when installing electrical components. If you are unsure or uncomfortable with the installation process, it is recommended to consult a qualified electrician.