User Manual Q&AAnswer
May 03, 2025 - 03:17 AM
To adjust the temperature settings on the QC Manufacturing Inc IT-30003 Attic Fan Adjustable Thermostat, follow these steps:
1. Locate the thermostat on the attic fan assembly. It is usually mounted on the side or top of the fan housing.
2. The thermostat has a temperature dial or xxxx . Turn the dial or xxxx to the desired temperature setting. The temperature range may vary depending on the specific model, but it is typically marked in degrees Fahrenheit.
3. Once you have set the desired temperature, the thermostat will automatically turn the fan on when the attic temperature rises above the set point and turn it off when the temperature drops below the set point.
Note: It is important to ensure that the thermostat is properly calibrated and installed according to the manufacturer's instructions. If you are unsure about the installation or have any questions, it is recommended to contact the dealer where you purchased the equipment or QC Manufacturing Inc. Customer Service for assistance.
Please refer to the QC Manufacturing Inc IT-30003 Attic Fan Adjustable Thermostat User Manual for more detailed instructions and troubleshooting information.
Add New Comment