How do I install the ACCORD LIGHTING Ceiling Light? (Accord Lighting Ceiling Light Instruction Manual)

Answer

manuals.plus

May 03, 2025 - 02:19 AM

To install the ACCORD LIGHTING 5046 Ceiling Light, please follow the steps outlined in the instruction manual provided:

1. Ensure that the electrical power is turned OFF before and during installation or maintenance. It is recommended to have the luminaire installed by a qualified electrician in accordance with local codes.

2. Check if the rated luminaire voltage requirements are compatible with the available mains supply in your installation area.

3. The luminaire comes with all the necessary LEDs included. Avoid touching the LED surface with bare hands, as this may reduce the life of the LEDs. Do not alter, relocate, or remove any electrical component.

4. Determine the desired position for the light on the ceiling and mark the positions of the holes using the LED base as a drilling template. Use an 8mm drill to make the holes and install the provided plastic bushing.

5. Insert the electrical cable through the metal canopy and crossbar.

6. Connect the electrical supply wires to the junction box according to applicable local codes, as shown in the diagram provided.

7. After making the electrical connections, place any excess wire inside the junction box.

8. Attach the support base to the ceiling using the supplied screws and plastic wall plugs.

9. Attach the luminaire to the support base using the locking screws provided.

10. Turn ON the electrical power.

11. Your ACCORD LIGHTING 5046 Ceiling Light is now ready for use.

Please note that these instructions are a summary of the installation process. It is highly recommended to read the complete instruction manual provided with the product before proceeding with the installation. Failure to comply with the instructions may cause accidents and void the product warranty.

For any warranty service, please contact your local dealer with proof of purchase. The manufacturer's responsibility for the product warranty is based on the correct observation of the instructions in the manual. The manufacturer is not liable for any damage caused by accidents, alterations, improper usage, or improper installation.

For additional warranty details or if you require further information, please visit the ACCORD Lighting website or contact the manufacturer directly.