How do I install the ABB Busch-SmartTouch Operating Panel? (ABB Busch-SmartTouch Operating Panel Instruction Manual)

Answer

manuals.plus

May 03, 2025 - 02:16 AM

The ABB Busch-SmartTouch Operating Panel can be installed in various ways depending on your preference and the location. Here are the installation methods and their corresponding dimensions:

1. Flush-mounted installation:

- This method involves installing the panel directly into the wall, making it flush with the surface.

- The recommended installation height for flush-mounted installation is typically around 1.2 to 1.3 meters from the floor.

- The dimensions for flush-mounted installation may vary depending on the specific model of the operating panel. Please refer to the product manual for the exact measurements.

2. Cavity wall installation:

- This method involves installing the panel into a cavity within the wall.

- The dimensions for cavity wall installation may vary depending on the specific model of the operating panel. Please refer to the product manual for the exact measurements.

3. Surface-mounted installation:

- This method involves mounting the panel on the surface of the wall, rather than recessing it.

- The dimensions for surface-mounted installation may vary depending on the specific model of the operating panel. Please refer to the product manual for the exact measurements.

4. Desktop installation:

- This method involves placing the operating panel on a desktop or any flat surface.

- No specific dimensions are provided for desktop installation, as it does not require any mounting.

Dismantling the operating panel:

- If you need to dismantle the operating panel, please refer to the product manual for detailed instructions specific to your model. The manual should provide step-by-step guidance on how to safely remove the panel.

For more detailed information and specific instructions on installing the ABB Busch-SmartTouch Operating Panel, please refer to the official instruction manual provided with the product.