How do I assemble the CHRISTOPEIT Home Sport Training Equipment Rowing Machine? (CHRISTOPEIT Home Sport Training Equipment Rowing Machine Instruction Manual)

Answer

manuals.plus

May 03, 2025 - 01:28 AM

To assemble the CHRISTOPEIT WP 1500 Home Sport Training Equipment Rowing Machine, please follow the assembly instructions provided in the instruction manual. Here is a step-by-step guide:

Step 1: Attach the rear foot (75) to the slide rail (69). Place the rear foot under the seat rail and tighten it with the provided screws and washers.

Step 2: Attach the seat rail (69) to the frame (52). Place the seat rail onto the holder at the frame and tighten it with the provided screws and washers. Secure the seat rail before training by screwing in the hand grip xxxx (68) and locking it with the locking pin (70).

Step 3: Attach the computer (1) to the computer support (2). Insert the batteries into the computer and connect the sensor cables to the computer. Place the computer on the computer holder until it clicks into place.

Step 4: Refill the water tank (16) with tap water. Use the provided water pump to pump water into the tank. Do not overfill the tank and make sure to close the filling plug tightly.

Step 5: Fold up and store the rowing machine. To fold up the machine, unscrew the hand grip xxxx (68) and pull the locking pin (70) to unlock the seat rail. Fold up the seat rail into a vertical position and secure it with the locking pin. Store the hand grip xxxx and washer in the thread at the bottom area of the frame.

Step 6: Perform checks to ensure the correct installation and function of all xxxx and plug connections.

For more detailed instructions and illustrations, please refer to the assembly instructions provided in the manual.

Note: It is important to follow the assembly instructions closely and use only the provided parts for assembly. Regularly check the firm seating of all screws, nuts, and connections before using the machine to ensure its safety.