User Manual Q&AAnswer
May 03, 2025 - 12:43 AM
To switch between different camera display modes on the NEXIGO N2000 Meeting 360 Camera, you can use the "Mode Switch" button on the control panel located on top of the camera. This button allows you to change the camera's display to suit different meeting scenarios. Here are the available modes and their descriptions:
1. Discussion Mode (default mode): This mode displays a 360° view of the whole room at the top, while below it, the camera automatically reframes on two active speakers.
2. Presentation1 Mode: This mode also displays a 360° view of the whole room at the top, but below it, the camera auto reframes on the active speaker.
3. Presentation2 Mode: In this mode, the camera auto reframes on the active speaker.
4. Global Mode: This mode shows two panoramic 360° videos that display all the attendees.
5. Patrol Mode: In this mode, the active speaker is displayed on the right side, while the camera automatically pans to display each attendee in turn on the left side.
Note: Active speakers refer to individuals who have been speaking continuously for more than 3 seconds.
To switch between these modes, simply press the "Mode Switch" button on the control panel. Each press will cycle through the available modes. Choose the mode that best suits your meeting needs.
For more information and detailed instructions, please refer to the user manual provided with the NEXIGO N2000 Meeting 360 Camera.
Add New Comment