How do I install and wire the Schneider Electric Circuit Breaker? (Schneider Electric Circuit Breaker Instructions Manual)

Answer

manuals.plus

May 02, 2025 - 07:47 AM

To install and wire the Schneider Electric GEX56604 Circuit Breaker, please follow the instructions provided in the Instruction Bulletin. Here is a step-by-step guide:

1. Before starting the installation, ensure that the electrical equipment is de-energized and all power sources are disconnected.

2. Determine the appropriate location for the circuit breaker installation, considering factors such as accessibility and proper ventilation.

3. Mount the circuit breaker securely using appropriate mounting hardware, following the recommended clearances specified in the Instruction Bulletin.

4. Connect the incoming and outgoing electrical conductors to the appropriate terminals on the circuit breaker. Refer to the DC Wiring Diagram provided in the Instruction Bulletin for the correct terminal connections.

5. Ensure that all connections are tight and secure, following the recommended torque values specified in the Instruction Bulletin.

6. If grounding is required, follow the guidelines provided in the Instruction Bulletin. It states that it is acceptable to ground the positive leg.

7. After completing the wiring, double-check all connections to ensure they are correct and properly tightened.

8. Once the circuit breaker is installed and wired, you can restore power to the electrical equipment and test its functionality.

Please note that the above instructions are a general guide, and it is essential to refer to the Instruction Bulletin provided with the Schneider Electric GEX56604 Circuit Breaker for specific details and any additional requirements or precautions. If you have any further questions or concerns, it is recommended to contact Schneider Electric's customer support at 888-778-2733 for assistance.