User Manual Q&AAnswer
May 02, 2025 - 05:01 AM
To set up the PASSTECH ER200 RFID Reader, follow these steps:
1. Select a Device: Choose the ER200 reader from the list of available devices in the smartphone application.
2. Select a Hotel: Choose the hotel where the ER200 reader will be used.
3. Select the Setting: Enter the required information for the reader settings.
- Device ID: Enter a 4-digit number as the device ID.
- Sub Company ID: Enter the key vendor ID (default is 001001 for testing purposes).
- All Floor: Select whether to enable or disable floor access.
- Total: Enter the total number of floors.
- Start Floor: Enter the starting floor number.
- End Floor: Enter the last floor number.
- Common Floor: Select the common floor.
Once you have entered all the necessary information, the ER200 reader will be set up and ready to use.
Add New Comment