User Manual Q&AAnswer
May 02, 2025 - 04:13 AM
To connect the RCF NXW 44-A speaker to a power source, follow these steps:
1. Before connecting the speaker, verify the voltage label on the rear panel of the speaker. The label will indicate the correct voltage for your region (115 Volt or 230 Volt).
2. Make sure the power supply cable is intact and connect it to the PowerCON input socket on the rear panel of the speaker.
3. If you need to connect multiple speakers, you can use the PowerCON output socket to send the AC power to another speaker. The power link is limited to 100-120V~ max 1600W or 200-240V~ max 3300W.
4. Ensure that the power source you are connecting to matches the voltage specified on the label. If the voltage is incorrect or if you cannot find the label, contact your vendor or authorized RCF service center for assistance.
5. Once the power cable is connected, you can turn on the speaker by using the power switch or button provided.
Please refer to the "REAR PANEL FEATURES AND CONTROLS" section of the owner's manual for more detailed information and illustrations on connecting the speaker to a power source.
Add New Comment