How do I install the SUNCO LIGHTING LED Ceiling Panel Light? (SUNCO LIGHTING LED Ceiling Panel Light Instruction Manual)

Answer

manuals.plus

Apr 30, 2025 - 10:19 AM

To install the SUNCO LIGHTING LED Ceiling Panel Light, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Carefully unpack the unit and inspect it for any defects. Wear work gloves to prevent dirt and oil from transferring to the luminaire. If cleaning is needed, use gloves and a dry cotton cloth. Avoid using hazardous chemicals.

2. Open the cover of the junction box and choose the knock hole in the junction box cover to open it.

3. Connect the power wire to the junction box using the line pressing board clamp on the power cord. Tighten the xxxx to secure the connection. Replace and secure the cover of the junction box using the xxxx .

4. Remove the ceiling plate and arrange the wire.

5. Place the LED panel light on the ceiling screens.

6. Ensure that the LED panel is mounted properly and securely.

For cable suspended mounting (kit sold separately):

1. Replace the existing earthquake tabs with the provided brackets used for fixing adjustable cables.

2. Pull the end cap of cable A through the provided flange and position it in the flange. Attach the flanges to the ceiling using self-tapping screws.

3. Insert the end of cable A into the hasp attachment on cable B. Adjust cable A to the desired height and cable B to the desired angle.

4. Hook the luminaire up to the hooks attached to the ends of cable B and make final adjustments.

5. Connect the LED driver to the AC main power.

For surface mounting (kit sold separately):

1. Assemble the mounting frame with the screws and connection plate.

2. Mount the frame on the ceiling using screws. Ensure that the wire is long enough for the next step.

3. After mounting the frame onto the ceiling, remove one side of the mounting frame.

4. Connect the wires from the main power to the LED driver, then slide the LED panel unit into the frame.

5. Replace the side frame back on.

Please note that it is important to consult a qualified licensed electrician for installation and to follow all safety precautions mentioned in the manual.