How do I install the Progress Lighting Bronze Line Voltage Hardwired LED Outdoor Step Light? (Progress Lighting Bronze Line Voltage Hardwired LED Outdoor Step Light Instruction Manual)

Answer

manuals.plus

Apr 30, 2025 - 09:55 AM

To install the Progress Lighting P660007-020-30 Bronze Line Voltage Hardwired LED Outdoor Step Light, please follow the assembly instructions provided in the manual:

1. Before starting the installation, ensure that all parts are included as shown in the contents diagram on page 1. If any part is missing or damaged, do not proceed with the installation.

2. Strip 3/8" of insulation from the ends of the electrical wires. Using wire nuts, connect the WHITE fixture wire to the WHITE supply wire from the outlet box, and connect the BLACK fixture wire to the BLACK supply wire.

3. Connect the fixture GROUND wire and supply GROUND wire using a wire nut or by fastening it to the GROUND xxxx on the mounting plate. Make sure to push all wire connections into the outlet box.

4. Push all wires inside the junction box and attach the fixture. Attach the LED Assembly (C) onto the junction box using the mounting screws supplied with the junction box (not included).

5. Apply the gasket (D) onto the desired front cover (A or B). Align the front cover (A or B) with the LED assembly (C), ensuring that the photo sensor hole on the front cover matches up with the photo sensor on the LED assembly. Finally, attach the front cover (A or B) to the LED assembly (C) using the cover screws (BB).

Please note that it is important to read and understand the entire manual before attempting to assemble, operate, or install the product. Additionally, always turn off the main power supply before cleaning the product or changing light bulbs. For further assistance or if you have any questions, you can contact Progress Lighting's customer service at 800-447-0573 or via email at customerservice@progresslighting.com.