User Manual Q&AAnswer
Apr 30, 2025 - 05:19 AM
To install the WASSERSTEIN B09TT4SYX1 Horizontal Wall Mount for Blink Video Doorbell, follow these steps:
1. Before installing the wall mount, remove your Blink Video Doorbell from its current location. Use the opening key provided with your doorbell to detach the doorbell backplate.
2. Attach the angle mount to the wall using the screws and anchors provided. The drill bit size required is 1/8 inch. If your doorbell is hardwired, ensure that the wires pass through the cutout and are connected to the backplate before mounting.
3. Attach the backplate to the wall mount using the short screws provided. Make sure the tab is on the bottom and the hooks are facing towards you.
4. Hook the doorbell onto the backplate. Press the top part in first, then firmly press the bottom part until it clicks into place.
5. Adjust the angle mount to your desired angle and secure it on the top and bottom using the tiny screws provided.
Please note that the WASSERSTEIN B09TT4SYX1 Horizontal Wall Mount is specifically designed for use with the Blink Video Doorbell. Ensure that you follow the safety instructions provided in the user manual to prevent any injury or damage to your property.
For further support or assistance, you can scan the QR code provided or email contact@wasserstein-home.com.
Add New Comment