User Manual Q&AAnswer
Apr 30, 2025 - 02:53 AM
To install the Schreder FLEXIA FG Maxi Side-Entry With Swivel Fixations, please follow these steps:
1. Before starting the installation, ensure that the power is switched off to prevent any electrical accidents.
2. Determine the appropriate location for the luminaire. Make sure it is positioned in a way that does not cause prolonged staring at a distance of less than 0.94m, as it may be harmful to the eyes.
3. Use the provided knuckle joint angles to adjust the luminaire to the desired position. You can choose between penetrating or enveloping angles, depending on your installation requirements.
4. Connect the luminaire to the power supply using the appropriate swivel fixations. The Schreder FLEXIA FG Maxi Side-Entry With Swivel Fixations has a 1" BSP (British Standard Pipe) connection, either female or male, depending on your specific installation needs.
5. If you are installing the luminaire directly on a wall, ensure that it is securely mounted and aligned properly.
6. For maintenance purposes, refer to the CR-KIT EU or CR-KIT CSA/UL, depending on your region. These kits provide instructions on how to disassemble and reassemble the luminaire for maintenance or repair activities. It is recommended to have these tasks performed by the manufacturer, their service agent, or a qualified person.
7. Safety precautions should always be followed during installation, maintenance, or repair activities. The light source contained in the luminaire should only be replaced by the manufacturer, their service agent, or a qualified person. Additionally, do not stare at the luminaire when operating, as it may emit hazardous optical radiation.
8. If there is any damage to the wire, it should be replaced by the manufacturer, distributor, or an expert to avoid any risks.
For more detailed information and illustrations, please refer to the Schreder FLEXIA FG Maxi Side-Entry With Swivel Fixations installation guide provided by the manufacturer.
Add New Comment