User Manual Q&AAnswer
Apr 30, 2025 - 02:50 AM
To install the WASSERSTEIN Arlo Ultra/Ultra 2/Pro 3/Pro 4 Smart Plug-in Floodlight, follow these steps:
1. Install the wall plate using the 4 screws and wall anchors provided.
2. Remove the protective tape from the EVA gasket and press the adhesive side firmly against the rear of the floodlight.
3. Mount the floodlight onto the wall plate and secure it with the long xxxx provided.
4. Insert the appropriate plug into the power adapter and turn it clockwise until it clicks. Note: 3 plug heads (US, UK, EU) are included.
5. Connect the floodlight cable to the adapter cable and xxxx on the plastic cover.
6. Plug the power adapter into the wall socket.
7. Peel off the covers from the back of the cable clips and stick them onto the wall. Then run the power adapter cable through the clips.
For more detailed instructions and illustrations, refer to the user manual provided with the product.
Note: It is important not to disassemble the floodlight, remove the protective LED lens, or look directly at the LEDs for an extended period of time, as it may damage the internal components and affect its functionality.
Add New Comment