How do I install the Ring Spotlight Cam Hardwired Kit? (ring Spotlight Cam Hardwired Kit Installation Guide)

Answer

manuals.plus

Apr 30, 2025 - 01:18 AM

To install the Ring Spotlight Cam Hardwired Kit, follow these steps:

1. Ensure safety: Before starting the installation, disconnect power at the fuse or circuit breaker. Verify that the supply voltage is correct (100 VAC~240 VAC 50/60 Hz). Always follow electrical code standards.

2. Mounting: Decide whether you want to mount the camera on a wall or ceiling. Ensure that the electrical box you use is weatherproof and includes threaded plugs. Use sealant if necessary.

3. Installation height and motion detection: Shut off power at the breaker. Remove any existing light or camera. Hang the weatherproof box cover using the included hanging hook.

4. Connect power wires: Connect the black and white wires on the wiring harness to the black (hot) and white (neutral) wires coming out of your electrical box. Use the included wire nuts to secure and protect the connections. The red wire is optional and is used to control other lights with your Spotlight Cam.

5. Auxiliary light control: If you want other lights to be triggered by the motion detector in your Spotlight Cam, wire them according to the provided diagram. These lights will also turn on when you manually enable your Spotlight Cam lights in the Ring app.

6. Secure the box cover: Use the included screws to secure the box cover to the electrical box. Add a metal washer, then a rubber washer to each xxxx before inserting. Insert and tighten the security xxxx to lock your Spotlight Cam into the box cover.

7. Mount the Spotlight Cam: Insert your Spotlight Cam into the box cover and turn it to the right to lock it in place.

8. Turn on power: Once the installation is complete, turn on power at the breaker. If the lights on your Spotlight Cam turn on, you're all set. If not, turn off power and check your connections.

9. Adjust camera angle: Position your Spotlight Cam so that the border of the motion detector is parallel to the ground. Tighten the side xxxx to secure the camera position.

For more detailed instructions and troubleshooting, refer to the Ring Spotlight Cam Hardwired Kit Installation Guide provided with the product or visit the Ring website for further assistance.