User Manual Q&AAnswer
Apr 29, 2025 - 01:46 PM
Sure! Here are the step-by-step instructions for installing the DESIGNERS FOUNTAIN EVT41052D3-35 4-Light Contemporary Flush Mount:
1. Before starting the installation, make sure to turn off the main power at the circuit breaker to prevent any electrical shock or fire hazards.
2. Remove any protective plastic film covering from the fixture before installation.
3. Gather the necessary tools for installation, including a Phillips screwdriver, wire strippers, and pliers.
4. The hardware included in the package consists of a swivel mounting plate, 3 wire nuts, 2 screws, and 2 mounting screws.
5. Begin by pulling the supply wires out from the outlet box (A).
6. Mount the swivel mounting plate (B) into the outlet box using the provided mounting screws (C).
7. Connect the black supply wire with the black fixture wire using a wire nut (D).
8. Connect the white supply wire to the white fixture wire using a wire nut (D).
9. Connect the ground fixture wire to the supply ground wire using a wire nut (D).
10. To ensure a secure connection, add a cable tie below each wire nut.
11. xxxx in the small screws (E) into the holes on the sides of the swivel mounting plate (B).
12. Hook the screws (E) of the swivel mounting plate (B) onto the cut out (F) of the light fixture pan (G).
Following these steps should help you successfully install the DESIGNERS FOUNTAIN EVT41052D3-35 4-Light Contemporary Flush Mount. If you have any further questions or encounter any issues during the installation process, please contact the Customer Service line at (855) 573-6156 from 8 AM to 6 PM EST, Monday to Friday.
Add New Comment