User Manual Q&AAnswer
Apr 29, 2025 - 01:41 PM
The SeeDevil SD-PPS300-G1 Portable Power Station can be recharged using three different methods: AC wall socket, cigarette lighter charger, and solar charger. The estimated charging times for each method are as follows:
1. AC Wall Socket: You can use a standard US 120V AC wall socket to recharge the power station. The estimated charging time is approximately 6 hours.
2. Cigarette Lighter Charger: You can recharge the power station through your car or truck lighter socket. This method allows you to access DC power from 12V/24V vehicles. The estimated charging time using the cigarette lighter charger is between 5.5 to 6.5 hours.
3. Solar Charger: If you have a compatible solar panel, you can recharge the power station using solar energy. The charging time will vary depending on the type and power of the solar panel, as well as the intensity of sunlight. With an 80W monocrystalline silicon solar panel under sufficient sunlight, it takes about 7-8 hours to recharge the power station.
It's important to note that these are estimated charging times and may vary depending on the specific conditions and circumstances.
Add New Comment