How do I assemble and install the DESIGNERS FOUNTAIN 5-Light Matte Black Glam Vanity Light Bar? (DESIGNERS FOUNTAIN 5-Light Matte Black Glam Vanity Light Bar Instruction Manual)

Answer

manuals.plus

Apr 29, 2025 - 11:46 AM

To assemble and install the DESIGNERS FOUNTAIN D263M-5B-MB 5-Light Matte Black Glam Vanity Light Bar, please follow these steps:

1. Before starting, turn off the main power at the circuit breaker to prevent any possible shock.

2. Remove the fixture and the mounting package from the box and ensure that no parts are missing by referencing the illustrations in the installation instructions.

3. Familiarize yourself with the parts included in the package. The manual should have an illustration of all the components.

4. Begin by attaching the mounting plate to the electrical box on the wall. Follow the instructions provided for your specific electrical box type.

5. Connect the electrical wires from the wall to the corresponding wires on the fixture. Make sure to match the colors (e.g., black to black, white to white, and green or copper to the ground wire).

6. Secure the wires with wire connectors, ensuring a tight and secure connection.

7. Attach the fixture to the mounting plate using the provided screws. Make sure the fixture is aligned properly and securely fastened.

8. Install the light bulbs into the sockets, following the recommended wattage and type specified in the manual.

9. Turn on the main power at the circuit breaker and test the fixture to ensure it is functioning correctly.

Please note that these instructions are a general guide, and it is essential to refer to the specific installation manual provided with your DESIGNERS FOUNTAIN D263M-5B-MB 5-Light Matte Black Glam Vanity Light Bar for detailed and accurate instructions. If you are unsure or unfamiliar with electrical wiring connections, it is recommended to seek the assistance of a qualified electrician to ensure a safe and proper installation.