User Manual Q&AAnswer
Apr 29, 2025 - 11:29 AM
To connect the Husky RCP-B30B Inflator to a tire for inflation, follow these steps:
1. Place the inflator on a flat surface.
2. Plug the power cord into a grounded 120-volt outlet.
3. Select the appropriate quick connect valve adaptor (J) for your tire valve.
4. Push the valve lever on the adaptor (J) down until it securely attaches to the tire valve.
5. Turn the On/Off switch (A) to the "I" position to turn on the inflator.
6. Monitor the PSI on the pressure gauge (C) to fill your tire to the desired pressure.
7. Once you have reached your desired air pressure, turn the On/Off switch (A) to the "O" position to turn off the inflator.
8. Lift up on the quick connect valve (J) lever and remove the valve (J) from the tire.
9. Unplug the power cord from the outlet and allow the inflator to cool.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment