User Manual Q&AAnswer
Apr 29, 2025 - 11:15 AM
To properly secure the HolstOR PRO surgical instrument holder to the sterile patient drape, follow these steps:
1. Remove the HolstOR PRO from the sterile packaging and place it on the sterile instrument table.
2. Drape the patient as required.
3. Secure the HolstOR PRO to the sterile patient drape using a towel, Kelly or artery clamp, and the supplied 4mm key ring. Refer to diagram B in the instruction manual for visual guidance.
4. Ensure that the HolstOR PRO is adequately secured to the sterile patient drapes before inserting any instrumentation.
5. The HolstOR PRO can comfortably accommodate up to three separate surgical instruments.
6. If you need to use additional HolstOR PRO instrument holders, they can be connected using the accessory clips located on the side of the HolstOR PRO.
7. After the procedure, discard the device in the approved medical waste container according to institutional policy.
Please note that it is important to follow the manufacturer's instructions for proper usage and disposal of the HolstOR PRO surgical instrument holder.
Add New Comment