User Manual Q&AAnswer
Apr 29, 2025 - 09:04 AM
To measure pulse width using the Fluke 88V Deluxe Automotive Multimeter, follow these steps:
1. Set the rotary dial to the "Pulse Width" function.
2. Connect the black test lead to the COM jack and the red test lead to the V/Ω jack.
3. Connect the red test lead to the signal source you want to measure.
4. Press the yellow "Select" button to enter the pulse width mode.
5. Use the range button to select the appropriate range for your measurement.
6. Press the yellow "Select" button again to start the measurement.
7. The meter will display the pulse width value in milliseconds (ms).
Please refer to the Fluke 88V Deluxe Automotive Multimeter Owner's Manual for more detailed instructions and additional information on using the pulse width function.
Add New Comment