User Manual Q&AAnswer
Apr 29, 2025 - 08:58 AM
To install the AURA LIGHT Lanternin Ceiling Grid in a plaster ceiling, you will need the following accessories:
1. Mounting frame for Plaster Ceilings: This is required for ceiling thicknesses of either 13mm or 20mm. The article numbers for different sizes are as follows:
- 1195x295: article number 82613120
- 595x595: article number 82613060
- 620x620: article number 82613062
2. Surface Mounting Box: This accessory is needed for the 1195x295 size as well as the 595x595 and 620x620 sizes. The article numbers are as follows:
- 1195x295: article number 82610120
- 595x595: article number 82610060
- 620x620: article number 82610062
3. Wire suspending 2m for Aura Lunaria Box: This accessory is used for the Aura Lunaria Box and has the article number 9330504.
Here is a step-by-step guide for installing the AURA LIGHT Lanternin Ceiling Grid in a plaster ceiling:
1. Determine the size of the Lanternin Ceiling Grid you have purchased (1195x295, 595x595, or 620x620) and the thickness of your plaster ceiling (13mm or 20mm).
2. If your ceiling thickness is 13mm or 20mm, use the appropriate mounting frame for plaster ceilings. Install the mounting frame by following the instructions provided with the frame. Make sure it is securely attached to the ceiling.
3. If you have the 1195x295 size, you will also need the surface mounting box with the article number 82610120. Install the surface mounting box according to the instructions provided with it.
4. If you have the 595x595 or 620x620 size, you will need the surface mounting box with the article numbers 82610060 and 82610062, respectively. Install the surface mounting box according to the instructions provided with it.
5. If you are using the Aura Lunaria Box, you can use the wire suspending accessory with the article number 9330504 to suspend the box from the ceiling.
6. Once all the necessary accessories are installed, carefully place the AURA LIGHT Lanternin Ceiling Grid into the mounting frame or surface mounting box. Ensure that it is securely held in place.
7. Connect the electrical wiring to the Lanternin Ceiling Grid according to the electrical installation guidelines provided with the product.
8. Test the installation by turning on the power and checking if the Lanternin Ceiling Grid is functioning properly.
If you have any further questions or need additional assistance, you can contact AURA LIGHT customer service at +46 (0)20 32 30 30 or send an email to info@auralight.com. You can also visit their website at www.auralight.com for more information.
Add New Comment