User Manual Q&AAnswer
Apr 29, 2025 - 08:48 AM
To pair the Blink500 transmitter and receiver, follow these steps:
1. Turn on the transmitter (TX) by long-pressing the power key.
2. Turn on the receiver (RX) by long-pressing the power key.
3. Insert the pairing pin into the pairing pin-hole of the RX receiver and press hard. The pair indicator should start quick flashing at every 0.5 seconds.
4. Within 10 seconds, press both the "+" and "-" buttons of the transmitter (TX) simultaneously.
5. The kit will be paired when the RX pair indicator becomes solid blue and the TX pair indicator starts flashing slowly.
Note: If you have a second transmitter (TX) that you want to pair, simply repeat steps 3 and 4.
Once the Blink500 transmitter and receiver are paired, they will automatically connect with each other, even when powered off and on.
Add New Comment