How do I install the lowes Charm 5-Light Black and Gold Modern LED Farmhouse Vanity Light Bar? (lowes Charm 5-Light Black Gold Modern LED Farmhouse Vanity Light Bar Instruction Manual)

Answer

manuals.plus

Apr 29, 2025 - 06:06 AM

To install the lowes A03812W5 Charm 35.4-Inch 5-Light Black and Gold Modern LED Farmhouse Vanity Light Bar, please follow these steps:

1. Before starting the installation, make sure to turn off the power. Go to the main fuse or circuit breaker box in your home and place the main power switch in the "OFF" position. Also, turn off the wall switch.

2. Ensure that the mounting surface is clean, dry, flat, strong enough, and 1/4" larger than the canopy on all sides. Correct any gaps between the mounting surface and canopy exceeding 3/16" as required.

3. Check if the ceiling or wall can support the weight of the lamp before installation.

4. Make sure the voltage you are using is 120V, and the maximum wattage per bulb is 40W.

5. Keep the lamp away from acidic and alkaline substances to avoid damaging the surface.

6. When replacing bulbs, turn off or unplug the lamp and wait until it is cool, as bulbs can get hot quickly.

Now, let's proceed with the assembly and installation:

Step A1: Unscrew the studs (F) from the back plate (E) and set them aside for later installation.

Step A2: Pass the supply wires from the outlet box through the mounting plate (C). Secure the mounting plate (C) to the outlet box with the provided mounting screws (A).

Step A3: Make the wire connections according to the wire connection diagram provided. Note that the ground wire is a bare copper wire, and never connect other wires to the ground wires.

Step A4: Align the holes in the back plate (E) and mounting plate (C), then secure them with the previously removed studs (F).

Step A5: Remove the socket rings (J) from the sockets (H). Carefully place the glass shades (I) on the sockets (H) and secure them with the socket rings (J) by tightening them until snug.

Step A6: Install bulbs (not included) into the sockets. Make sure not to exceed the maximum wattage recommended on the socket.

Step A7: Double-check that everything is installed properly, and then you can turn on the light and enjoy!

For any further assistance or to order replacement parts, you can contact the customer care team at +1 850 296 2377 or email them at homecustomercare@outlook.com during working hours (Mon - Fri 9:00 - 16:00 EST).