Answer

Apr 28, 2025 - 02:33 PM
To clean your Quick-Step Studio laminate floor on a regular basis, you can follow these steps:
1. For general cleaning, use a dust mop or vacuum with the correct hard surface attachment. The surface layer of the laminate flooring is hard and compact, making it difficult for dirt and dust to adhere to it.
2. For heavier cleaning, you can occasionally wet mop the floor with water only. Make sure to use a well-wrung-out mop and avoid pouring liquid directly on the floor or using an excessively wet mop that may leave moisture standing on the floor.
3. If necessary, you can use a solution of 1 cup of vinegar per gallon of water or 1/3 cup non-sudsing ammonia per gallon of water for a deeper clean.
4. It is important not to use detergents, abrasive cleaners, soaps, waxes, or polishes on your Quick-Step Studio laminate floor. There is no need to wax or refinish the floor.
5. Avoid using rotating beater bars, floor scrubbers, steamers, jet mops, buffers, or similar products on the floor.
6. Wipe up spills immediately and do not allow topical moisture to remain on the floor longer than the time specified in the product warranty.
By following these cleaning instructions, you can easily maintain the cleanliness of your Quick-Step Studio laminate floor.
Add New Comment