User Manual Q&AAnswer
Apr 28, 2025 - 02:13 PM
To pair the transmitter and receiver, follow these steps:
1. Turn on both the transmitter and receiver.
2. On the transmitter, long press the "△" button for 2 seconds until the screen displays the device name and password.
3. On the receiver, long press the "△" button for 2 seconds until the screen displays the device name and password.
4. Make sure the device name and password on the receiver match the ones displayed on the transmitter.
5. Turn on the WPS (pairing) mode on both the transmitter and receiver at the same time.
6. Once the pairing is complete, turn off the receiver that has finished pairing.
7. Repeat the same pairing method to add additional receivers. Note that one transmitter can pair with a maximum of 4 receivers.
8. Finally, turn on all of the paired devices.
Please refer to the "UI INSTRUCTION" section of the user manual for more information on the pairing process and other menu options.
Add New Comment