User Manual Q&AAnswer
Apr 28, 2025 - 11:56 AM
To install the PLAY R129/03 Three Fix Evo Car Seat using the ISOFIX system, please follow these steps:
1. Locate the ISOFIX connectors on the car seat. These are usually found at the base of the car seat.
2. Pull the ISOFIX connector release lever to unlock the ISOFIX connectors.
3. Extend the ISOFIX telescopic arm by pulling it out until it reaches the desired length.
4. Position the car seat in the desired seating position in your vehicle. Ensure that the backrest of the car seat is in contact with the vehicle seat.
5. Insert the ISOFIX connectors into the ISOFIX anchor points in your vehicle. These anchor points are usually located between the seat cushion and the backrest of the vehicle seat.
6. Push the car seat firmly into the vehicle seat to engage the ISOFIX connectors. You should hear a click sound indicating that the connectors are securely locked.
7. Check that the car seat is securely installed by pulling it forward and backward. It should not move more than 2.5 cm (1 inch) in any direction.
8. Adjust the car seat's backrest and base to the desired position for your child's comfort.
9. Secure your child in the car seat using the safety belt provided. Make sure the belt is not twisted and is properly adjusted to fit your child snugly.
Please note that these instructions are a general guide. It is important to refer to the specific instructions provided in the PLAY R129/03 Three Fix Evo Car Seat manual for detailed installation steps and any additional safety precautions.
Add New Comment