User Manual Q&AAnswer
Apr 28, 2025 - 11:24 AM
To fill the Rothenberger Roairvac R32 vacuum pump with oil, follow these steps:
1. Make sure the pump is turned off.
2. Unscrew the charging plug located on the upper part of the pump.
3. Slowly add the recommended oil until the middle of the oil level sight glass is reached (indicated by the MAX MIN line).
4. xxxx the charging plug back on tightly.
It is important to only use Rothenberger oil for the pump, as using different lubricants can reduce performance and cause damage. The pump is supplied with a mineral oil bottle, but it does not come pre-filled with oil. Ensure that you fill the pump with the correct amount of oil specified in the technical data section of the manual.
Note: Take care not to spill the oil and dispose of it properly according to relevant local laws and guidelines.
For more detailed instructions and safety precautions, refer to the "Set-up of pump before first operation" and "Lubrication" sections in the Rothenberger Roairvac R32 vacuum pump instruction manual.
Add New Comment