How do I install the FREDRICK RAMOND Jolie Modern Heritage Brass LED Ceiling Lighting Fixture? (FREDRICK RAMOND Jolie Modern Heritage Brass LED Ceiling Lighting Fixture Instruction Manual)

Answer

manuals.plus

Apr 28, 2025 - 08:55 AM

To install the FREDRICK RAMOND FR30105HBR Jolie Modern Heritage Brass LED Ceiling Lighting Fixture, please follow the assembly instructions provided in the manual.

1. Determine the desired height of the fixture and select the appropriate length of stems (S) to hang the fixture. Slip the wires through the center of the stems and thread them onto the top of the fixture body. Repeat this process for all stems.

2. Slide the fiberglass sleeving (F) over the wires and slip approximately 1/2" of the sleeving down into the top stem.

3. Slip the fixture loop (L) onto the wire, over the fiberglass sleeving, and thread it onto the top stem.

4. If mounting the fixture as a semi-flush, secure the provided small stem directly to the canopy and top of the fixture. If mounting as a pendant, use fiberglass sleeving to cover the wires that thread through chain links.

5. Hang the fixture from the ceiling following the provided mounting instructions.

6. After the fixture is hung, you can proceed with glass installation. Remove the barrel xxxx with threaded stud (T) and plastic washer (P) from the top rail (R) of the fixture body.

7. Align the threaded hole in the top rail with the hole in the top of the glass panel (G). Thread the barrel xxxx with stud into the threaded hole, ensuring the plastic washer is between the glass panel and the base of the barrel xxxx . Repeat this step for all glass panels.

8. Continue adding glass panels around the fixture until all panels are installed.

Please refer to the drawings and diagrams in the manual for a visual representation of the installation process. It is recommended to consult a qualified electrician if additional wiring or dimmer installation is required.