User Manual Q&AAnswer
Apr 28, 2025 - 07:39 AM
To install the DENALI KTM 1290 Super Adventure R Sound Bomb Mini Horn, please follow these steps:
Step 1: Locate the Sound Bomb Mini Horn bracket mounting location on the right-hand side of the bike and remove the factory bolt.
Step 2: Secure the Horn Mount in place by starting with the Spacer (d), then both Flat Brackets (c), Washer (b), and attach using the M6x45mm Flanged Hex Head xxxx (a). Make sure to rotate the Flat Brackets (c) to the right by approximately 45° to mount the Sound Bomb Mini horn in the correct position.
Step 3: Mount the Sound Bomb Mini Horn to the open mounting hole on the flat bracket and secure it using the horn's provided hardware. The horn should end up tucked below the right side fairing. Once you find the right angle and position for the mount and horn, properly tighten all hardware.
Please note that DENALI products should always be installed by a qualified motorcycle technician. If you are unsure of your ability to properly install the product, it is recommended to have it installed by your local motorcycle dealer. DENALI takes no responsibility for damages caused by improper installation.
For any further questions or concerns, you can contact DENALI's gear experts at 401.360.2550 or visit their website at www.denalielectronics.com.
Add New Comment