How do I install the Fisher Paykel Square Fine Handle Kit for Integrated Refrigerator Freezer? (FISHER PAYKEL Square Fine Handle Kit Integrated Refrigerator Freezer User Guide)

Answer

manuals.plus

Apr 23, 2025 - 07:10 AM


To install the Fisher Paykel AHD5RD36W 36 Inch Square Fine Handle Kit for Integrated Refrigerator Freezer, please follow the steps below:

1. Ensure that you have all the necessary tools and components for installation, including the handle kit, screws, and a screwdriver.

2. Start by removing any existing handles or hardware from the refrigerator freezer door.

3. Take the square fine handle kit and align it with the pre-drilled holes on the door. Make sure the handle is positioned correctly and level.

4. Insert the screws provided into the holes on the handle and tighten them using a screwdriver. Ensure that the screws are securely fastened, but be careful not to overtighten and damage the handle or door.

5. Repeat the process for the other side of the door if you have a pair of handles.

6. Once both handles are installed, check that they are securely attached and do not wobble or move when pulled or pushed.

7. Clean the handles and the surrounding area with a mild detergent and water solution to remove any fingerprints or smudges.

8. Congratulations! You have successfully installed the Fisher Paykel AHD5RD36W 36 Inch Square Fine Handle Kit for Integrated Refrigerator Freezer.

If you encounter any difficulties during the installation process or have any further questions, please refer to the user guide provided with the product or contact Fisher & Paykel's Customer Care Centre at 1.888.936.7872 for assistance.