User Manual Q&AAnswer
Apr 23, 2025 - 07:02 AM
To pair the with the Wiser system, follow these steps:
1. Open the Wiser Home app on your smartphone or tablet.
2. On the Home page, tap the icon.
3. Tap "Devices" and then tap "Climate" (tab).
4. Select "Boiler Relay" from the list of devices.
5. Tap "Next" to start the pairing process.
6. Press and hold the Setup button on the Boiler Relay for more than 2 seconds.
7. The Boiler Relay's LED will flash green and amber, and then turn solid green when it successfully joins the Wiser system.
8. In the app, you will see a confirmation that the Boiler Relay has been successfully joined.
9. Enter a name for the Boiler Relay and tap "Next".
10. On the Boiler Relay Setup page, select the Control Type (Relay or OpenTherm) and the Heat Source Type (Gas Boiler, Electric Boiler, Oil Boiler, or Heat Pump) if applicable.
11. Tap "Next" to complete the setup.
Note: Make sure you have a Wiser Radiator thermostat or Room thermostat installed for the Boiler Relay to work properly.
For more detailed instructions and information, refer to the Schneider Electric CCTFR6001 Wiser Boiler Relay User Guide.
Add New Comment