User Manual Q&AAnswer
Apr 23, 2025 - 06:28 AM
To change the temperature display from Celsius to Fahrenheit on the TAT-5000S-RS232-CORO Exergen Temporal Scanner, follow these steps:
1. Insert the end of a bent paper clip into the pinhole on the side of the device to release and remove the cover.
2. Locate the switch inside the device. It is labeled for Fahrenheit (°F) and Celsius (°C).
3. Use the tip of a small screwdriver to slide the switch to the desired temperature scale. For example, slide it to the left for Fahrenheit or to the right for Celsius.
4. Replace the cover on the device.
Please note that the TAT-5000S-RS232-CORO Exergen Temporal Scanner comes preset based on your preference at the time of purchase. However, if you need to change the temperature display scale, you can follow the steps mentioned above.
Add New Comment