User Manual Q&AAnswer
Apr 23, 2025 - 05:11 AM
To turn on the Orbegozo PHE 50 Gas Patio Heater, follow these steps:
1. Make sure the gas valve on the gas supply cylinder is completely open.
2. Press and turn the variable control xxxx to the PILOT position (counter-clockwise 90º).
3. Press down the variable control xxxx and hold it for 30 seconds. While holding it down, press the igniter button to light the pilot flame.
4. After the pilot flame lights, turn the variable control xxxx to the minimum position and leave it there for 5 minutes or more before adjusting it to the desired temperature position.
Please refer to the instruction manual for more detailed information and safety precautions.
Add New Comment