User Manual Q&AAnswer
Apr 23, 2025 - 05:07 AM
To install the exhaust hose, follow these steps:
1. Feed the end of the hose through any available window.
2. Secure the hose in place using the included adapter.
3. Ensure that the distance between the unit and the window is at least 50cm.
4. To seal the gap around the adapter, you can use the extendable slides that are supplied with the appliance. Offer the extendable slides to the window gap and adjust the length as needed. Feed the exhaust hose through the slide and slide the window across so that the spacer is held securely.
5. Take care to maintain protection against intruders.
Note: It is important to use only the hose provided and avoid kinks and bends in the exhaust hose to prevent the unit from overheating. The length of the exhaust hose is specially designed for this product, so do not replace or extend it with an alternative hose.
For more detailed instructions and illustrations, please refer to the "Installation" section in the ADDVENT AVAC9000 Portable Air Conditioner User Guide.
Add New Comment