User Manual Q&AAnswer
Apr 23, 2025 - 05:06 AM
According to the manual, the S S REGELTECHNIK TM 54 Thermasgard Duct Temperature Measuring Transducer is calibratable. Here is a step-by-step guide on how to calibrate it:
1. Ensure that the device is installed and connected properly according to the mounting and installation instructions provided in the manual.
2. Before starting the calibration process, make sure that the device is in a stable and controlled environment with a known reference temperature.
3. Access the calibration settings of the TM 54 by following the instructions provided in the manual. This may involve accessing a menu or using specific buttons or switches on the device.
4. Select the desired temperature range for calibration. The TM 54 offers eight switchable measuring ranges, so choose the range that is most suitable for your calibration needs.
5. Compare the temperature reading on the TM 54 with the reference temperature in the controlled environment. If there is a deviation, adjust the calibration settings accordingly to align the readings.
6. Repeat the calibration process at different temperature points within the selected range to ensure accurate calibration across the entire range.
7. Once the calibration is complete, verify the accuracy of the TM 54 by comparing its readings with other reliable temperature measurement devices.
Note: It is recommended to have the calibration performed by an expert to ensure precise and accurate results.
Add New Comment