User Manual Q&AAnswer
Apr 23, 2025 - 04:22 AM
To install the ET2 E34207 CHIMES 34 Inch Smart Chandelier, it is recommended to consult an electrician as this product requires knowledge of electronic lighting systems. However, here is a general overview of the installation process:
1. Before getting started, make sure to read the instructions carefully and gather all the required contents for assembly.
2. Choose a clean, level, and spacious area for assembly, avoiding hard surfaces that may damage the product.
3. Carefully remove all packaging materials and retain them for future use.
4. Combine stem lengths to achieve your desired mounting height.
5. Follow the wiring diagram provided in the manual, making sure not to cut factory connections without qualified knowledge.
6. Connect the wires between the Wiz controller and the LED source, paying attention to the wire colors.
7. Ensure that the wires are connected to the driver found in the canopy and not directly to the power source to avoid any short circuits.
8. Once the wiring is complete, make sure to tighten all screws fully.
9. It is important to note that this product must be installed by a licensed electrician with knowledge of electronic lighting systems.
For more detailed instructions and safety precautions, please refer to the user guide provided with the ET2 E34207 CHIMES 34 Inch Smart Chandelier.
Add New Comment