User Manual Q&AAnswer
Apr 23, 2025 - 03:58 AM
To mount the discs on the TOTAL TG1091156 Electric Grinder, follow these steps:
1. Place the grinding/cutting wheel on top of the inner flange and over the spindle. Make sure it is firmly seated on the raised section of the inner flange.
2. Place the outer flange over the disc, making sure that the raised side is facing towards the disc and that it is fully seated in the center hole of the disc.
3. When clamping thin section metal diamond blades, the outer flange must be reversed so that the flat/concave side bolts against the hub of the blade.
4. Press and hold the spindle lock button and tighten the outer flange with the two-prong torque wrench. It may be necessary to rotate the spindle to fully locate the spindle lock button.
5. When the outer flange washer is tight, release the spindle lock button and remove the key.
Make sure to follow these instructions carefully to ensure proper mounting of the discs on the grinder.
Add New Comment