User Manual Q&AAnswer
Apr 23, 2025 - 03:52 AM
To dim the LED lights using the , you can use the Push DIM function. Here's how:
1. On/Off Control: Short press the Push DIM button to turn the lights on or off.
2. Stepless Dimming: Long press the Push DIM button to achieve stepless dimming. Keep pressing the button until you reach the desired brightness level.
3. Changing Brightness Direction: With every other long press on the Push DIM button, the brightness will go in the opposite direction. This allows you to increase or decrease the brightness as needed.
4. Dimming Memory: The lights will remember the previous brightness value when you short press the Push DIM button. So, if you turn off the lights and then turn them back on, they will return to the previous brightness level.
Please note that the output brightness is also subject to the input voltage of the driver when you power on again after a power cut.
For more detailed information and illustrations, please refer to the "Wiring Diagram" and "Attentions" sections in the LTECH LM-36-24-G1T2 LED Intelligent Driver Instruction Manual.
Add New Comment