User Manual Q&AAnswer
Apr 23, 2025 - 03:33 AM
To assemble the FLYTEC DASH Balance Bike, follow these steps:
Step 1: Insert the front fork through the ring bearing and the frame.
Step 2: Insert the second ring bearing, nut, washer, and tube clamp to the headset in sequence.
Step 3: Insert the clamp cover onto the handlebar, then slide the handlebar fully onto the headset.
Step 4: Lock the tube clamp with the spanner. Hide the clamp with the clamp cover.
Step 5: Place the quick release bracket over the top of the frame.
Step 6: Slide the seat post into the frame.
Step 7: Hand tighten the xxxx on the quick release bracket and close the clamp.
Step 8: Put the wheels into the front and rear forks.
Step 9: xxxx the dome nuts tight on each side of both wheels using the spanner.
For a visual representation of the assembly process, refer to the user manual provided with the FLYTEC DASH Balance Bike.
Note: It is important to routinely check that all parts are securely fastened and in good working condition before each use. Replace any worn or broken parts immediately.
Add New Comment