User Manual Q&AAnswer
Apr 23, 2025 - 03:12 AM
To install the KOSPEL EKCO.MN3 Electric Central Heating Flow Boiler, follow these steps:
1. Hang the boiler in a vertical position on fixing screws or the attached hanger, with the inlet and outlet pipes to the bottom, maintaining clearances from the walls and the ceiling.
2. Connect the boiler to the central heating system equipped with cut-off valves.
3. Fill the central heating system with treated water or non-freezing liquid to ensure the durability of immersion heaters.
4. Vent the central heating system.
5. Connect the boiler to the electrical system.
6. Assemble and connect the room regulator sensor and other devices according to the "Connection point external sensors and devices" diagram.
7. After completing the above steps, start the boiler, set up the boiler language and maximum output, and vent the pump.
8. Set the maximum temperature factor in the installation.
Please refer to the KOSPEL EKCO.MN3 Electric Central Heating Flow Boiler Instruction Manual for more detailed instructions and diagrams.
Add New Comment